Frequently asked questions
Quick answers to the questions we hear most. Need more detail? Browse the help articles below or contact us.
Choosing & Getting Started
I'm a complete beginner. Where do I start?
Start with Arts & Crafts Epoxy Resin (1:1). It's our most versatile formula and the easiest way to begin — perfect for coasters, jewellery, small moulds and resin art.
Learn more: The basics of using Craft Resin epoxy
Which Craft Resin formula should I choose?
It depends on what you're making: Arts & Crafts for creative projects and small moulds, Table Top for coating flat surfaces, Deep Pour for river tables and thick castings, and UV Resin for small jewellery pieces that cure in minutes.
What is the difference between epoxy resin and UV resin?
Epoxy resin is a two-part formula that you mix before use. It cures in 24–72 hours and suits larger pieces, moulds and surfaces. UV Resin needs no mixing and cures in seconds under a UV lamp, so it's ideal for small pieces poured in thin layers.
Learn more: UV resin vs epoxy resin: which is best for your project
Which UV lamp do I need?
Choose a lamp designed for UV resin, with a wavelength of 365–405 nm. Curing time depends on the lamp's power: about 120 seconds per side under a 6 W lamp, or about 60 seconds per side under a 72 W lamp. Always cure both sides.
Learn more: How to choose a UV lamp for resin
Mixing & Pouring
How do I mix resin correctly?
Measure by volume, then mix slowly for a full 3–5 minutes, scraping the sides and bottom of the cup. Pour the mix into a second clean cup and stir briefly again.
Learn more: Step-by-step mixing basics
What is the mix ratio for each product?
Arts & Crafts and Table Top: 1:1 by volume. Deep Pour: 2:1 by volume — always measure by volume. Silicone 15A / 30A: 1:1 by weight (unlike our epoxy resins). UV Resin: a single-component formula, no mixing needed.
How long is the working time?
At 25 °C, you have about 35 minutes with Arts & Crafts, 25 minutes with Table Top and about 1 hour with Deep Pour. UV Resin stays workable until it's exposed to UV light.
Learn more: How temperature and humidity affect working time
Why did my resin get hot or go hard in the cup?
This usually happens when the batch is too large, the room is very warm, or the mixed resin was warmed in water.
Learn more: Working with resin in warmer temperatures
How thick can I pour in one layer?
Arts & Crafts: up to 6 mm per layer. Table Top: up to 3 mm per coat. Deep Pour: up to 50 mm per layer; 30–40 mm for 5–10 kg pours; 20–30 mm above 10 kg. UV Resin: up to 2–3 mm per pass.
Learn more: Using Craft Resin on thicker projects
Curing & Layers
How long does Craft Resin take to cure?
Arts & Crafts: hard in 24 hours, fully cured in 72 hours. Table Top: hard in 36–48 hours, ready to use after 72 hours. Deep Pour: hard in 24–48 hours (longer for thick pours), fully cured in 72 hours. All our epoxy resins reach full strength in about 21 days.
Learn more: The epoxy resin curing process explained
Why is my resin still soft or sticky?
The most common causes are a cold room, an incorrect mix ratio, not mixing long enough, or an incompatible colourant.
Learn more: How to fix curing problems
What room temperature do I need?
The ideal range depends on the product: Arts & Crafts 21–29 °C, Table Top 21–27 °C, Deep Pour 21–24 °C (for batches up to 5 kg; larger pours need a cooler room), UV Resin 20–27 °C, Silicone 21–26 °C. Keep the room within this range for the entire cure.
Learn more: How to get your work area to the ideal temperature
When can I demould, move or use my piece?
Deep Pour: demould only once fully cured, after 72 hours. Arts & Crafts and Table Top: hard in 24–48 hours; wait 72 hours before using your piece. Silicone moulds cure in 3–5 hours at 25 °C. Full strength and heat resistance develop over 21 days.
Can I add a second or multiple layers?
Yes. Pour the next layer while the previous one is still tacky, or wait for a full cure, then sand and clean the surface before pouring.
Learn more: How to top coat with Craft Resin
Troubleshooting
Why is my UV resin still sticky?
Usually the curing time was too short for your lamp, only one side was cured, the layer was thicker than 3 mm, or an object in the resin blocked the light.
Learn more: UV resin guide: how to avoid common mistakes
Why do bubbles appear, and how do I remove them?
Bubbles are caused by mixing too fast, air escaping from porous surfaces, or cold, thick resin. For Arts & Crafts and Table Top, pass a heat gun or torch over the surface — keep it moving and never hold it in one spot. For Deep Pour, use only a quick sweep of the torch, as overheating can cause cracking and yellowing.
Learn more: Using a heat torch to get rid of bubbles
Why is my resin cloudy or milky?
Common causes are humidity above the recommended limit, moisture on your tools or surface, a drop in temperature during curing, or an incompatible additive.
Learn more: How to fix cloudiness and other common mistakes
What causes fish eyes and craters?
They're caused by surface contamination, such as silicone from cleaning sprays, skin oils, wax or dust.
Learn more: Ripples, fish eyes and pin holes: how to avoid them
Why is my resin yellowing, and will it yellow over time?
Craft Resin is formulated to resist yellowing over time, but no resin is completely immune. Holding a heat gun in one spot, curing in a very hot room, or long exposure to direct sunlight can affect clarity.
Projects & How-To
How do I preserve flowers in resin?
Dry the flowers completely first. Use Arts & Crafts for thin pieces (up to 6 mm per layer) and Deep Pour for deep flower blocks.
Learn more: How to preserve flowers in epoxy resin
Can I put photos, lights or other objects in resin?
Yes. For photos and thin objects, use Arts & Crafts (up to 6 mm per layer). For deeper objects and keepsakes, use Deep Pour.
Learn more: How to add photos to epoxy resin
How do I make a river table?
Use Deep Pour. Calculate the volume you need, seal every seam of your mould and mix 2:1 by volume. Pour slowly from one end, then leave the table undisturbed for 72 hours until fully cured before demoulding.
Learn more: How to use Deep Pour epoxy resin
Which mould should I use, and do I need a release agent?
Silicone moulds work best, and no release agent is needed when you cast resin into a finished silicone mould.
Learn more: What mould do I need for casting resin?
What does cured resin stick to, and not stick to?
Cured resin peels right off silicone, which is why silicone moulds, craft mats and cups are reusable. It bonds to a previous resin layer that is sanded, clean and dry.
Learn more: What Craft Resin sticks to — and what it doesn't
Safety & Documents
Is Craft Resin safe to use at home?
Craft Resin epoxy is formulated for low odour and is suited to home and professional use. Follow the safety data sheet for handling and ventilation and wear gloves: uncured resin can irritate skin and, with repeated contact, cause an allergic skin reaction.
Do I need a respirator?
Craft Resin epoxy is a low-odour formula with no added solvents — comfortable to use indoors with normal ventilation. Follow the safety data sheet for your product: it lists the ventilation and protective equipment required. Always wear gloves and eye protection.
Resin got on my skin or in my eyes. What should I do?
If resin gets on your skin, wash it off immediately with plenty of soap and water. If it gets in your eyes, rinse them with water for several minutes. Get medical advice if irritation develops or persists.
Where can I get a safety data sheet (SDS)?
Visit our Safety Data Sheets page. You can also email hello@craft-resin.eu with the product name and your country, and we'll send you the current SDS for your market.
Orders & Support
How long does delivery take?
Once your order ships, delivery usually takes 1–3 business days to Germany and 3–7 business days to other EU countries.
Learn more: Shipping & Returns
Can I track my order?
Yes. Once your order ships, we'll email you a shipping notification with your tracking number so you can follow your package to your door. Can't find it? Check your spam or junk folder, or contact our support team — we're happy to help.
What is your returns policy?
You can return products within 30 days of purchase with a receipt or proof of purchase. Please contact our support team before sending anything back.
Learn more: Refund policy
My order arrived damaged or wrong. What should I do?
We're sorry about that! Please contact our support team at hello@craft-resin.eu, and we'll make it right. Including your order number and a photo of the item helps us resolve it faster.
How do I contact support?
Email us at hello@craft-resin.eu. We usually reply within 1–2 business days.
Account & Rewards
How do I join the Loyalty Programme?
Joining is free — just create an account on our store and you're in.
Learn more: Craft Resin Rewards
How can I redeem my points?
You can redeem 100 points for a €5 discount code, valid for 30 days.
Learn more: Craft Resin Rewards
Blog posts

How to Dry Flowers for Resin: 5 Methods That Work
Not sure how to dry flowers before adding them to epoxy resin? Explore five practical methods, from traditional air drying and silica gel to budget-friendly alternatives and microwave drying. Learn...

Can You Be Allergic to Epoxy Resin?
Learn how epoxy resin allergies and skin irritation can develop, what symptoms to watch for, how UV resin differs from epoxy, and what steps can help reduce exposure and work more safely with resin

How to Clean Silicone Moulds for Resin Without Damaging Them
Learn how to clean silicone moulds for resin safely, remove cured or sticky residue, avoid common cleaning mistakes, and store your moulds properly to help keep future castings clean and smooth





