CRAFT RESIN Arts & Crafts resin 1L | Crystal Clear, Mix (1:1)
Craft Resin 1L Epoxy Resin for Crafts is a crystal clear two-part resin designed for small creative projects, including jewellery, coasters, resin art, small molds and decorative pieces. The low-viscosity formula flows easily into molds and fine details, creating a glossy, transparent finish that showcases colours, pigments and embedded elements. With a simple 1:1 mix ratio, the 1L size is a practical choice for small resin projects, testing new designs and everyday crafting.
- Made for Art Coating and Creative Pieces. This is the resin to choose for coating canvas art, flat artwork and small boards, and for coasters, trays, jewellery and small craft pieces. Pour up to 6 mm per layer — a flood coat over flat artwork is usually 1–2 mm, well inside that.
- Easy 1:1 Mix Ratio for Beginners. Measure equal parts resin and hardener by volume, mix slowly, and pour. The simple 1:1 ratio makes this resin easy to use for beginners while still giving experienced makers reliable results.
- Low-Bubble, Low-Viscosity Formula. The smooth, low-viscosity formula flows easily into silicone molds, corners, and fine details. It helps air bubbles rise and release more easily, making it ideal for clean, detailed craft pours.
- Cure Time & Pour Depth. You’ll have around 35 minutes of working time at 25°C. The resin reaches a hard cure in 24 hours. For best results, pour up to 6 mm per layer.
- Low-Odour Formula. Made for home and studio use, this formula is low-odor. Always wear gloves, protect your workspace, and work in a well-ventilated area.
- Not for Deep Pours. This resin is made for thin creative pours. For river tables, deep molds, or flower preservation blocks, use Deep Pour resin. For large tabletops or heavy protective coating, use Table Top resin.
Not sure how much you need? Work it out with the Epoxy Resin Calculator.
Fast shipping on all orders for all customers.
Our 24/7 customer support is always here to help you.
Product specifications
Craft Resin Arts and Crafts Epoxy Resin is a 1:1 two-part epoxy system with a recommended pour depth of 6 mm, a 35-minute working time at 25 °C, and a 24-hour hard cure. These parameters make it suitable for controlled art and craft applications where clarity, surface quality, and working time are important.
For best results, follow the recommended mixing ratio, avoid pours deeper than the stated layer depth, and allow the resin to cure fully before handling, using, or exposing the finished piece to heat or food contact.
Two-part arts and crafts epoxy resin
Resin art, jewellery, coasters, trays, small moulds, canvas coating, doming, keyrings, charms, photo and artwork coating, small object encapsulation
Crystal clear, transparent, glass-like, high-gloss
1:1 by volume
6 mm per layer
35 minutes at 25 °C
Hard cure 24 hours at 25 °C; full strength develops over about 21 days
21–27 °C
Up to 80 °C
Yellowing-resistant formula
Suitable for incidental food contact once fully cured
Yes
Low odour, low VOC
Store in a cool, dry place away from sunlight
12 months
All you need in one set
Compare and choose your perfect formula
1:1 by volume
1:1 by volume
2:1 by volume
6 mm
3 mm
Up to 5 cm
35 min
25 min
60 min
24 hours
36–48 hours
48–72 hours
1400 cps
3800 cps
600 cps
Resin art, jewelry, coasters, trays, small molds
Countertops, bar tops, tabletops, furniture coating
River tables, deep molds, flower preservation, large castings
Thin pours and craft coatings
Thin surface coating
Deep castings
Crystal clear, glossy, transparent
Crystal clear, glossy, protective coating
Crystal clear, transparent casting
FAQ
If you have any other question, please, visit our FAQ section or write us in Live Chat
What's the shipping and delivery timeline?
Orders typically arrive in a few days, but we advise allowing 1-3 working days for deliveries.
How much resin mix do I need?
To work out how much resin mix and therefore what Craft Resin kit you will need for your project, please visit our website: https://www.craft-resin.eu/pages/epoxy-resin-calculator
Does Craft Resin yellow over time?
Craft Resin is formulated to be yellowing-resistant and helps resist yellowing over time. It is not immune to yellowing — clarity is affected by prolonged direct sunlight — and we do not describe it as non-yellowing.
How long does Arts & Crafts resin take to cure?
Craft Resin Arts & Crafts resin reaches a hard cure in 24 hours at 25°C. Full mechanical strength develops over around 21 days.
Why are my projects not curing?
Check your workspace temperature 21–27°C. Ensure resin & hardener ratio is equal by volume, mix for 3-5 minutes, and allow more time for thin or thick layers. If steps were incorrect, curing may fail, requiring a restart.
How can I prevent bubbles in my epoxy resin projects?
To avoid bubbles, keep the resin and hardener in a room at 21–27°C (below 15°C, warm the resin to 30°C before mixing), mix them slowly and steadily, pour in layers no thicker than 6 mm (or up to 5 cm for deep pour resin), and use a heat torch to eliminate surface bubbles.
Any Questions?
You can contact us through our contact page! We will be happy to assist you.
What is the mixing ratio for Arts & Crafts Epoxy Resin?
Arts & Crafts Epoxy Resin is mixed 1:1 by volume — equal parts resin and hardener. Measure by volume and mix thoroughly before pouring.
How thick can each layer of Arts & Crafts Epoxy Resin be?
Pour each layer up to 6 mm. Deeper pieces are built up in several layers once the previous one has set.
Craft with Confidence! Worry-Free.
If you’re not satisfied with our product, simply contact us and we’ll give you a full, 100% hassle-free refund.
You may also like
